Compositor SoftwareCompositor Software

Tag : Compositor 4

By ruslany

No Internet messenger

No Internet messenger

Compositor Software project entered the active transmission channel testing stage. Compositor kernel version 8.4.2 can resist up to 29900 injections with feedback implementation. This value is experimentally set and coincides to different injection types for each wavetable. In other words, each wavetable coincides with one injection type. On the present moment, I use wavelets for transmission channel testing. Compositor software testing wavelet is a two bar wavetable encased in a window function. To process feedback recordings into wavelets I use a special script made with MaxMSP software and based on the latest Compositor kernel version. This script has more than 90% efficiency. Then I test these wavelets in auxiliary channel of Compositor v9 Hypervisor at speeds up to 150-omega. Wavelets transform into granular synthesis at 150-omega speed. Each wavetable is a communication service on the low frequency carrier transposed into the heard spectrum. Wavetable transposes with all the tones used in a sequence and saturate the spectrum with carriers. The Morse code communication is achieved using these tones comb. This way using the Compositor v9 Hypervisor I feed these carriers into the ether. In a consequence of this, the personal radio service (PRS) with connection to individual subscribers and not the global ether as it were before transfer function implementation is possible. I call this radio service No internet messenger, because it is personalized and doesn’t require internet connection at all. This radio doesn’t need an outboard antenna and works instantly after the computer audio driver selection. After conducting all the needed tests, including the whole wavetable and wavelet pool, I processed the Compositor software channel on data modules instead of buffer. I account this step as a most important as it was not available in previous builds of this software. In accordance to this, I receive the sustainable radio service without outboard modem breakthroughs on scanner and while transmitting the signal. Combs are not symbolized as in previous Compositor software versions. Only direct ether to subscriber is available. It introduces the immune system to software kernel for communicating with other ether participants and gives a possibility to choose if you want to communicate with them or not. Looking into all three stages of Compositor software development, I can characterize them in a following way:

  1. Open synthesizer mode (Open mode, Global ether). Used in SASER SAS24P3L, Compositor v3 Hypervisor, Compositor 4.
  2. Closed synthesizer mode (Closed mode, Global ether). Used in Compositor v5 Hypervisor, Compositor v6, Compositor v7 Hypervisor.
  3. Personal mode with activation function (Closed ether). Used in Compositor v8, Compositor v9 Hypervisor, Compositor 10.

The Compositor personal mode will be available in 10th version of the software and I can think about Compositor kernel usage for messenger creation, which doesn’t require an internet connection. Such messenger will include server and client applications. Summarizing this, all Hypervisors may be looked at as the messenger servers and stable versions of Compositor as client applications.

By ruslany

Compositor Software Winter Sale

Compositor Software Winter Sale

Huge sale comes on Winter Holidays of 2017/2018 at Compositor Software Web Shop! Now you can buy the exclusive algorithmic composition software for reduced price. Almost every version of the software goes with big discount, including the bundled versions.

Here is the list of all products, which are on sale now:

Discount Price
Compositor Pro 2 30% € 74,42
Compositor 4 65% € 102,90
Compositor 4 Max for Live 20% € 36,00
Compositor 4 Extension 1 70% € 77,70
Compositor 3 Feeders 30% € 112,00
Compositor 3 Hypervisor 30% € 180,03

 

The sale lasts from 24.12.2017 14:00 GMT to 03.01.2018 20:00 GMT

By ruslany

Compositor Software Web Shop Black Friday deals

Huge sale comes here at Compositor Software Web Shop for Max for Live and Standalone products on Black Friday!

First, now you have an opportunity to buy the Compositor v3 bundle for a reduced price of €136,50, which comes with Max for Live instruments and Standalone software. The bundle includes AI-RT1024, FF8, TC25, N9000 and SASER Max for Live, which can be used as Standalone and in Ableton Live.

Second, Compositor v4 price dropped twice and is now €147. For this money you receive two-DSP system suitable for feeding with your own two-bar loops or with internal synthesizer engine and physical modelled generators.

Third, Compositor v4 Extension 1 Beta Bounces pack reduced even more and now costs only €77,70, which comes with 43 loops in 44100 Hz 24-bit WAV format taken from MDL12 Max for Live device and presets to make them sound fresh on Compositor v4 Standalone.

Valuable addition to Black Friday sale is Compositor 4 Max for Live, which goes for a reduced price of €31,50.

Terms: from Thursday 23rd November until Monday 27th November.

By ruslany

Compositor 4 Autumn Sale

Compositor 4 Autumn Sale

Dear friends,

I am glad to announce the Compositor 4 Autumn Sale! 30% discount on Compositor 4 program and 50% discount on Beta Bounces pack! Good opportunity to buy the exclusive algorithmic software for a lower price!

Compositor 4 features:

  • 7 real-time oversampling buffer combinations in 1
  • Three layers of quantization
  • Lo-Fi decimator effect
  • Subtractive synthesizer with real-time modulation
  • Tone-hold mode
  • Long Endurance Arranger
  • One-window layout visual appearance
  • Automatic and manual mode switches
  • Signal level meter with overload indicator and dB values
  • Snapshot of every parameter
  • DSP processors on/off switches to save CPU resources

https://www.compositorsoftware.com/compositor-4/

https://www.compositorsoftware.com/compositor-4-extension-1/

Auction terms: 30.10.2017 – 03.11.2017

By ruslany

The i11 architecture

The Compositor 4 software is based on Generic Kernel 7.0.2 of i11 architecture. It is twice faster than i7 intel processors. It is counted this way: i11 contains 12 harmonics based on the Carson’s rule, i7, on the other hand, contains 8 harmonics. Dividing 12 on 8 the number of 1,5 is received, which is the number of processor speed increase.

The Compositor 4 couldn’t be realized without the Spherical Interaction driver injection in Compositor kernel 7.0.2. This driver enables the status bar, which works for all z values. Spherical Interaction driver is active only for Sr layer and gives statuses for other layers.

The i11 is a tube architecture and emulation of this can be found using Waveshaping modules of Compositor 4. The real tube lamp is on the master channel (Waveshaping 2) as it stays in front of the master output without dc-offset trimming. This also merges the device with old tube radios. Tube characteristics can be found on waveform display and look like the spine of the rising and falling curves of waveform. The more it is smooth and proximate to vertical line, the faster tube is emulated. Most realistic tubes are on z=128. You can emulate transistor lamps with 2-4-6-8 mesh or valve lamps with 2-3-7-8 mesh. You can also emulate tape effects on z=128 selecting the Rt layer. This is an effective tuning of the Compositor 4 instrument. On lower z values, decimation is too hard to achieve the modern lamp or tape technic.

Extra additions to manual: You should turn Ether on to overexcitate the lamp at initial tuning of the system and turn off Ether while achieving communication with equipment.

By ruslany

Compositor 4 is out now!

The preparation of Compositor 4 master version took all spring, summer and also the part of autumn of 2017. The last changes touch the creation of loops library taken from MDL12 non-duplex modem, which you may load in 8 decks of Compositor 4 for simultaneous playback. These profiles give you a unique chance to obtain 42 devices based on wavetables. Changing the tuning of z parameter you are also switching between 7 Compositor RT-zX devices, which may work in automatic mode using the arranger and in manual mode. It gives you a sum of 56 devices for the price of one in standalone version of the software. Using z parameter you can change internal architecture of the software in fraction of a second, which allows to make perfect preset interpolations. In Compositor 4 you are purchasing the universal instrument for loops bouncing, which may be a complete track and as a part of your music set. All decks work synchronous to Compositor 4 internal generators tempo and are indispensable parts of software. You can create a channel matrix of 8×42 and use the carriers of physical modeling in unison to loops playback. The sum of Compositor 4 signal processed using master MS-decoder and stereo image enhancer, which improve spatial characteristics of you phonogram. It is worth mentioning about master bus tube, which warms the signal and enhances it with harmonics. 6 master tube harmonic sets allow to change tube type in master channel cascade using one mouse click. An ability to load your own loops in decks makes this instrument a unique groovebox with unrivaled characteristics. The modulator and main parameters section is also worth a price, because you can change the phonogram tempo from 0.05 bpm to 5760 bpm without a loss in synchronicity of the playback. The Multicolor display allows remembering program tunings using the color and set up in relation to tempo and program multiplier. The large amounts of algorithm combinations, 56 device profiles, two types of internal synthesis and master procesing make Compositor 4 indispensable studio instrument.

You can buy Compositor 4 now for the price of €45 for Max for Live version and €294 for Standalone version of software. Visit our shop to chose feeders for Max for Live version. If you would like to buy the whole package of Compositor Software instruments look into bundle options.