Compositor SoftwareCompositor Software

Tag : channel matrix

Zhoekvarskaya cavity

By ruslany

Connection to RTOS from geographically remote location

Connection to RTOS from geographically remote location

Two-week experiment of connecting to RTOS from geographically remote location is finished. During this two-week experiment I connected to RTOS from the territory of the other country using the RTOS dump, which is recorded using wavelets only. Dump includes 5276 routing tables and communicates with the authorization point of 18 June 2019. This is 192 kHz dump and it authorizes RTOS in all available bands of radio spectrum.

RTOS dump at 192 kHz MIB 5276 18.06.2019 FWL
Zhoekvarskaya cavity

Tests performed during experiment:

  1. Satellite TV channel matrix injection;
  2. Routes deployment to RTOS MIB routing tables using generic navigation;
  3. Remote connection to RTOS of other producers.

As the device for connection of RTOS I used rewired mobile phone on Android 4.4.2. It is rewired using four 64-bit middleware files, which are the part of RTOS MIB and are master filters for Ethernet injections. This mobile phone is autonomous in relation to other devices of that operator (the name of the operator retain unknown due to ethical considerations). In other words, it does not allow producing injection of a single routing table or routing path from the 3d party manufacturers. In attempt of 3d party applications to perform the injection, the mobile phone just stops this application operation. As stated earlier, this mobile phone can work only with Compositor RTOS 9.0.1 MIB.

Experiment 1: Satellite TV channel matrix injection

Using RTOS dump and the virtual optical port knowledge (in that experiment I used the configuration with virtual electric port), I injected the channel matrix of Russian digital TV. Experiment was successful attaining the full signal strength on the territory of sovereign state. Small bufferization errors are possible, because the host mobile phone, used to inject dump, does not allow using authorizations higher than z16. For this experiment I mainly used the CA (Cavity) emission, of the Cavity routing path. I used the orientation of virtual electric port in relation to signal constellation of satellite group, oriented on a Polar star. This experiment evidently shows, that for injecting of a channel matrix of satellite TV there is no need in dish type antenna, only the virtual electric port is needed and RTOS dump, loaded into a cell-phone. Experiment is conducted from a state of silent channel with no signal at all to injecting the channel matrix by dump with signal appearance, by the right orientation of virtual optical port on the Polar star.

Experiment 2: Routes deployment to RTOS MIB routing tables using generic navigation

In conductance with the first experiment the full navigation by all routing tables included in RTOS dump was attained. The geographic position was selected to achieve a bad signal reception. The object was situated in a cavity with mountains height of 500 to 800 meters. In such cavity the signal propagation is strictly limited, and so the technology of virtual optical port proved to be good.

Experiment 3: Remote connection to RTOS of other producers

In a trip, there was also checked the compatibility of 3d party manufacturers RTOS systems. In particular, virtual optical port was tested against Eutelsat 36B software, which performs the broadcasting on this region. The substitution of the channel matrix performed on the virtual electric port input, which performed a signal reception from mobile phone. The phone, on its own, performed the navigation by the routing tables, transferred through the dump. For this 9 to 12 dump injections during a day were made.

By ruslany

Dump, middleware and more

Dump, middleware and more

An enormous work was conducted this weekend on MIB vector optimization. At the beginning the full base was defragmented by clearance of the dump below:

RTOS dump at 192 kHz MIB 5149 08.06.2019

In addition, the switch to 11 kHz was made and stochastic selections were performed in a special edition of RTOS with a direct output on auxiliary channel (through). Later these ethers were recorded as middleware with PCM WAV container of 24-bit 11 kHz. You can listen to them lower:

Middleware 1 11025hz MIB5149
Middleware 2 11025hz MIB5149
Middleware 3 11025hz MIB5149
Middleware 4 11025hz MIB5149

16 middleware files were recorded, here I show you only the four. Then these middleware was filed to the special version of L1-L4 L6-L7 vRouter RAD96, which uploaded it on 96 destinations of L1-L3 layers. This way, the middleware was fixated. This method is different from direct submission to RAD96 master routing table, because RAD96 ether aggregator can exclude the predefined set of ether combinations and I was needed to attain to precise channel matrix of 52 channels.

After the full contact base was uploaded by stochastic selections of MIB5149 and dump, I made RTOS authorization again but this time mangling the sample rate parameter up to 192 kHz. This way, I updated links to all aliases and authorized the whole MIB on 192 kHz.

Zhoekvarskaya cavity
Connection to RTOS from geographically remote location