Compositor SoftwareCompositor Software
Ida Bagus Made Poleng

By ruslany

Boosty – Forest People (FP mark emitted from the Ethernet)

Boosty – Forest People (FP mark emitted from the Ethernet)

Ruslan Yusipov Boosty and Exalted projects are valuable to the Russian Authors Society as they have previously unreleased and never heard routing paths. These projects have such routing paths, which are only heard of by the author. One such routing path is Boosty – Forest People produced in 2009 and never widely available to the public to the extent that only the author knows about its existence. Two unmastered versions of Forest People routing path loaned for emission. They are Dub version and Original mix. The routing path is produced in Boosty studio and remains unsigned and unlicensed to that day (unsigned at the present moment). In accordance with that I decided to make a fourth place emission of 281 routing tables. The emission named by FP mark has the most active navigation.

Using the dump of 5557 wavelets I made the job of translating 127 pages of English documentation on Russian language. This documentation is a continuation on CP-6137-960FX server development and is the modular switch of Compositor RTOS type installation manual. Using the injection of this dump I was able to do this job in a working week time. Injections were made by listening to a dump using insertion of Ultimate Ears ear monitors with dump playback of three times every four hours. The sum of injections was from 6 to 9 playbacks a day.

It was a robust experience and it forced me to do the job faster.

Ruslan Yusipov

You can taste the injection of this dump by listening to it by the link below:

RTOS dump at 192 kHz MIB 5557 15.07.2019 FWL
Zhoekvarskaya cavity

By ruslany

Connection to RTOS from geographically remote location

Connection to RTOS from geographically remote location

Two-week experiment of connecting to RTOS from geographically remote location is finished. During this two-week experiment I connected to RTOS from the territory of the other country using the RTOS dump, which is recorded using wavelets only. Dump includes 5276 routing tables and communicates with the authorization point of 18 June 2019. This is 192 kHz dump and it authorizes RTOS in all available bands of radio spectrum.

RTOS dump at 192 kHz MIB 5276 18.06.2019 FWL
Zhoekvarskaya cavity

Tests performed during experiment:

  1. Satellite TV channel matrix injection;
  2. Routes deployment to RTOS MIB routing tables using generic navigation;
  3. Remote connection to RTOS of other producers.

As the device for connection of RTOS I used rewired mobile phone on Android 4.4.2. It is rewired using four 64-bit middleware files, which are the part of RTOS MIB and are master filters for Ethernet injections. This mobile phone is autonomous in relation to other devices of that operator (the name of the operator retain unknown due to ethical considerations). In other words, it does not allow producing injection of a single routing table or routing path from the 3d party manufacturers. In attempt of 3d party applications to perform the injection, the mobile phone just stops this application operation. As stated earlier, this mobile phone can work only with Compositor RTOS 9.0.1 MIB.

Experiment 1: Satellite TV channel matrix injection

Using RTOS dump and the virtual optical port knowledge (in that experiment I used the configuration with virtual electric port), I injected the channel matrix of Russian digital TV. Experiment was successful attaining the full signal strength on the territory of sovereign state. Small bufferization errors are possible, because the host mobile phone, used to inject dump, does not allow using authorizations higher than z16. For this experiment I mainly used the CA (Cavity) emission, of the Cavity routing path. I used the orientation of virtual electric port in relation to signal constellation of satellite group, oriented on a Polar star. This experiment evidently shows, that for injecting of a channel matrix of satellite TV there is no need in dish type antenna, only the virtual electric port is needed and RTOS dump, loaded into a cell-phone. Experiment is conducted from a state of silent channel with no signal at all to injecting the channel matrix by dump with signal appearance, by the right orientation of virtual optical port on the Polar star.

Experiment 2: Routes deployment to RTOS MIB routing tables using generic navigation

In conductance with the first experiment the full navigation by all routing tables included in RTOS dump was attained. The geographic position was selected to achieve a bad signal reception. The object was situated in a cavity with mountains height of 500 to 800 meters. In such cavity the signal propagation is strictly limited, and so the technology of virtual optical port proved to be good.

Experiment 3: Remote connection to RTOS of other producers

In a trip, there was also checked the compatibility of 3d party manufacturers RTOS systems. In particular, virtual optical port was tested against Eutelsat 36B software, which performs the broadcasting on this region. The substitution of the channel matrix performed on the virtual electric port input, which performed a signal reception from mobile phone. The phone, on its own, performed the navigation by the routing tables, transferred through the dump. For this 9 to 12 dump injections during a day were made.

By ruslany

More than 80% wavelets in MIB of RTOS

More than 80% wavelets in MIB of RTOS

On the present day there are more than 80% wavetables processed to wavelets in the management information base of RTOS. Script allows processing up to 5 wavetables in a minute that is why full processing will take some time. To the end of this week the whole MIB should be processed on wavelets. This will allow creating two identical bases for two RTOS systems. The first base will contain wavetables only and will be used in the version of RTOS with the pass through of the second derivative of a function in the virtual console port. The second base will be wavelets only and will be used in version of RTOS with the second derivative of a function on auxiliary output.

The first version will support maximum up to 5-omega direct and aux regeneration speeds and is more like Ableton Live 10 engine. The second version doesn’t include the pass through of the second derivative of a function and has auxiliary speeds up to 150-omega. Such version allows authorizing all 7 levels of generic feeders simultaneously, which is more suitable for injections with authorization, because there is no need to fight for authorization on the predefined level, as all levels connected simultaneously. From the other side, the first version is interesting, because of the musical results, which it can produce, when I record middleware from routing tables. That is why I decided to maintain both bases and versions of RTOS simultaneously, which will grow with each emission.

Before a full transfer on the two bases was completed I recorded a final dump with mixed management information base, which includes the Boosty – Mini Bikes track emission. It is an interesting minimal techno composition with active use of hardware virtual synthesizers and analog sequences on bass parts. This emission includes 127 routing tables.

RTOS dump at 192 kHz MIB 5276 15.06.2019

By ruslany

Dump, middleware and more

Dump, middleware and more

An enormous work was conducted this weekend on MIB vector optimization. At the beginning the full base was defragmented by clearance of the dump below:

RTOS dump at 192 kHz MIB 5149 08.06.2019

In addition, the switch to 11 kHz was made and stochastic selections were performed in a special edition of RTOS with a direct output on auxiliary channel (through). Later these ethers were recorded as middleware with PCM WAV container of 24-bit 11 kHz. You can listen to them lower:

Middleware 1 11025hz MIB5149
Middleware 2 11025hz MIB5149
Middleware 3 11025hz MIB5149
Middleware 4 11025hz MIB5149

16 middleware files were recorded, here I show you only the four. Then these middleware was filed to the special version of L1-L4 L6-L7 vRouter RAD96, which uploaded it on 96 destinations of L1-L3 layers. This way, the middleware was fixated. This method is different from direct submission to RAD96 master routing table, because RAD96 ether aggregator can exclude the predefined set of ether combinations and I was needed to attain to precise channel matrix of 52 channels.

After the full contact base was uploaded by stochastic selections of MIB5149 and dump, I made RTOS authorization again but this time mangling the sample rate parameter up to 192 kHz. This way, I updated links to all aliases and authorized the whole MIB on 192 kHz.

By ruslany

MIB 5149 and growing

MIB 5149 and growing

CP-6137-960FX server MIB extended with one more emission and is 5149 routing tables now. This time the 2009 experiments with Waldorf Blofeld synthesizer were seized from the Ethernet. The recording of Intro to Boosty project Live in Studio 69 club was filed to vSwitch MDL12. The emissions were 142 wavetables, among which original ethers of routing paths, translations, and preparation material for further emissions.

You can listen to the dump of Compositor RTOS with MIB 5149 recorded on 08.06.2019 in audio file beneath:

Compositor RTOS dump 8×32 MIB5149 08.06.2019

By ruslany

NPO Compositor network map creation from 0 BC to AD 4000

NPO Compositor network map creation from 0 BC to AD 4000

vRouter RAD96 metronome

Have you, probably, noticed that metronome of vRouter RAD96 inadvertently approaches our days? That is, SR timer has passed 2019 year already and RT timer is at 2015, TR timer is one and a half century ago at the year 1870. Now, you can say that NPO Compositor network map established from 0 BC up to our days and metronome still goes forward. Soon the injections of the contact base will be performed in the year 2050 and forward.

Compositor Networks map

That is, starting from 80th of the last century metronome counts not the automatic reverse mechanism, but manual RTOS, that is why I can control the process in its essence. For example, to increase conductivity and to turn reverse on (in rare cases, when “brakes” are not needed).

Compositor RTOS dump 8×32 MIB5007 03.06.2019

I was not satisfied by automatic vRouter RAD96 by the fact that it is always in reverse mode and there is no opportunity to control this process. Using RTOS there is no such problem, because I can thrust in direct and indirect ether.

By ruslany

The dumps future workstations can only read

The dumps future workstations can only read

We are get used to 8-bit SysEx dumps, many of us even listened to their audio presentations. However, how the dump of modern embedded real-time operation system sounds? Let’s start with the fact that modern operation system is 64-bit, which gives almost 8 times more dynamic range, than 8-bit dump. Moreover, RTOS dumps are written with 192 kHz sample rate. In this post I will sum up two dumps, which were made with MIB 4795 and MIB 5007, which allows saying about their origin only one thing: these dumps are the music productions on their own.

In essence, we are dealing with routing tables, reproduced on the high regeneration speed. But, my task is to find the source of these routing tables, the hardware and software system, which can read these dumps and respond not only with sequence of events, but with sound generators tuning, sound synthesis parameters and effects. This station should include 64-bit operation system itself, working with 192 kHz sample rate, which is critical to CPU working frequency.

Such DAW should allow reading dumps with a large dynamic range and perform settings in accordance to the loaded network map. I would like to achieve panning and equalization in virtual environment without human intervention, in addition it should be performed not by a topology of some algorithm, but to exist inextricably with routing path filed in the current moment.

I remind you that 8 routing tables mixture is sufficient for a complete routing path. Taking in account 8×32 matrix for such routing tables, they are aired on 32 destinations. This tells us about high load of RTOS channel in a moment of dump creation. The high load on output channels creates tasks on input channels, because communication is a kernel-loop relationship and performed in a cycle with consistent calls and answers. To receive the answer the calling system should set in a que, because only 8 input streams available in RTOS. That is why there is a constant insufficiency in RTOS, it can’t be covered even with high console port regeneration speeds, and because to upload routing tables into the buffers the time is needed where high regeneration speed doesn’t play any role.

That is why the whole MIB should be loaded using autoload with aliases for the full base without forced thrust. I repeat, that forced thrust creates a big que and events processed only using generic feeder interrupters that is why you should constantly monitor filed system statuses. Because, there are no injections in filed systems on such high regeneration speeds as 192 kHz, then it is needed an additional time to receive an answer. If you need to receive an answer immediately, you should run RTOS on discretization frequencies lower, than 192 kHz, where the injections happen all the time, but the quality of the answer will be lower.

Compositor RTOS dump 8×32 MIB4795 26.05.2019
Compositor RTOS dump 8×32 MIB5007 03.06.2019

By ruslany

5000 routing tables in CP-6137-960FX MIB

5000 routing tables in CP-6137-960FX MIB

NPO Compositor reached the final goal of emission for CP-6137-960FX server, which is 5000 routing tables. Management information base is 5007 routing tables that allows organizing not only 4000 VLAN, but also 5000 VLAN. NPO Compositor will continue to expand the management information base up to 6000 VLAN, because each routing table gives access to its own VLAN trunk or autonomous system.

You can listen to that dump, which includes full 5000 MIB:

Compositor RTOS dump at 192 kHz with 5000 MIB on 03.06.2019

This dump allows you to authorize in Compositor real-time operation system and attain to its external control by RAD96 autonomous system. To connect to Compositor RTOS it is enough to playback that dump using streaming method in online player with RAD96 autonomous system turned on. In this case, autonomous system will serve as middleware, which will merge Compositor software and your equipment and will make remote connection to CP-6137-960FX server possible.

When NPO Compositor reached 5000 routing tables it gained the full MIB, which finishes L1-L4 L6-L7 vRouter RAD96 development. To order vRouter RAD96 licenses use Compositor Software contact form.

AI-RT1024 in Ableton

By ruslany

Bessel beam for solving laser diffraction problem

Bessel beam for solving laser diffraction problem

You and I are probably familiar with a problem, which was set to the wide audience on protection from hypersonic weapons. Now, I can definitely say that a solution is ready – it is Bessel beam. Bessel beam, in a contrast with standard laser do not diffract and can be acoustic. That is why it can be used in any weather conditions. Returning to the post on laser stand, Compositor Software is ready to help us in this problem also. The thing is that beam physical modeling in Compositor RTOS is an exact 1st order Bessel function and Bessel beam is formed in the virtual optical port. That is, it cannot be fixated for a long time using the standard tools.

And you should be assured there were a number of such tools. For example, MDL12 vSwitch spectral estimation in Ableton Live 9 showed that signal is formed in the bandwidth set, but the ether character and its origin is unknown. I also used MIL standard decoders, that pushed me closer to the problem solving, because the signal started to decipher, but I was unable to define, which MIL standard the Compositor (hacker) is using.

Of course, NPO Compositor can’t offer the solution, which can’t be certified because the transmission standard is undefined. But, the solution exists and already works on CP-6137-960FX server. There is the trend in musical and communication software to full-screen interfaces. For example, many routers goes with full-screen administration. Compositor RTOS was developed in that stream, that is why even user logging, which saved independently of session, comes in full-screen mode.

Another question is the routing table authorization in VLF network. Because, on a present date the emission of routing paths (tracks) of Exalted, Boosty and Perch projects were performed, the large contact base was aggregated. Then, considering the modern trend to digital and biometric passports, such authorization of 4795 routing tables can be considered as EU diplomatic passport. The legitimacy of such authorization is on question, but as an emission was done, bounded by the Royalty project, then no one prohibits the author to collect his own credits for his productions performance. That is why such activity is identical to running his own publishing company. That is why I decided to extend the NPO Compositor functionality to provide the services of routing paths (tracks) emission and collection of routing tables of equipment, which performed your productions. One emission will cost 150€ and will take about 4 hours 30 minutes with NPO Compositor equipment. You can book your own appointment on your production to return its original value in routing tables on the Compositor Software page in Facebook social network.

By ruslany

Compositor RTOS 8×32

Compositor RTOS 8×32

Compositor RTOS 8×32 log:

Compositor RTOS 8×32 at 192 kHz (26-05-2019)

This recording characterizes RTOS as MIMO (multiple-input and multiple-output) system with the channel matrix of 8 inputs, connected to virtual PoE injector, and 32 outputs, signal to which is connected by RAD96 channel subset.

After making FB mark emission, the routing table pool is 4795 wavetables. This way, NPO Compositor smoothly approaches the goal of 5000 routing tables for current equipment type. RAD96 router MIB may contain no more than 5000 routing tables, even if the reported quantity is 29900 routing tables stored on the original equipment. This conclusion was made out of the fact that after making FB emission RAD96 router modem was piloted by an external signal. In accordance with this, NPO Compositor approached the RTOS critical mass very close that coincides with resultant. In other words, 4795 routing tables are enough to make resultant approximation and taking its sum.

FB emission is a submission, which characterized by high channel saturation and fast channel silence. In a contrast with previous emissions, where the task was to calm the channel quickly, by generic feeders injection, this emission surfs by itself before the channel silence is reached, making feeders out of order even before they warm up. This way, the previous generations of feeders are weakly suited for work with that emission. The manual piloting of multiplier is needed with a fast switch of feeder chains. In any case, the task of FB emission is to switch the RAD96 piloting on and it reaches this goal even on z = 32 S system matching.

The result of this is the backdoor in RTOS, which is a leakage of information from RTOS MIB to an undefined intruder. If it is the Compositor head machine, then he is evidently not happy by making an additional emission, because reaching 5000 routing tables, the head machine will be CP-6137-960FX server, which works with 64-bit resolution. And coincidently, Compositor will have no power to make an emission of that server, which is, perhaps, the NPO Compositor goal to reach not only 0-emission autonomous system, but 0-emission multichannel router.

1 2 3 15
Ida Bagus Made Poleng
Boosty – Forest People (FP mark emitted from the Ethernet)
Zhoekvarskaya cavity
Connection to RTOS from geographically remote location
AI-RT1024 in Ableton
Bessel beam for solving laser diffraction problem