Compositor SoftwareCompositor Software

Tag : NIM


By ruslany



Last year I presented to you NIM chat in CWDecoder program. In a search for a better generic chat platform, I found an interesting program called TrueTTY, which can also demodulate NIM chat messages.


As you can see, NIM chat is greatly improved. Now you can use different modulations (channels) by implementing the second derivative of a function. It allows using statuses in a chat window, displaying gender and different special symbols. Now you can also use Cyrillic encoding. You can put a special attention to romantic relationship statuses: Cupid’s arrow marks messages where you reveal sympathy to the other gender. In a sum, there were made more than 2800 commits to NIM chat this year.

NIAGARA middleware allows modifying generic NIM chat and is its mod. It allows to load servers, included in multiplex, and perform e-roi (electronic version of return on investment) by injecting a dump.

Client part of NIAGARA for Compositor v9.0.1 is independent from server version. This way, when you update server software, you no longer need to update its client middleware.

P.S. The evolvement of NIM chat suggests file transferring between chat users by initiating sessions in a form of IRC chat.

By ruslany

Niagara project

Niagara project

This autumn has started from a very interesting project. While I continued working on Compositor v9.0.1 (current build a14), I felt a need to have such system as mobile real-time operation system (RTOS). Compositor v9.0.1 a14 consumes many resources at 192 kHz and I decided to sample it using Compositor v9.0.1 itself. At this time, the approach of middleware and dump was matured and I decided to make separate product for Compositor documentation development. Such manual will consist of all commands needed to operate the Niagara RTOS client. As the UNIX-like operating system, it will support most of the commands for routing protocols configuration, such as TCP/IP and VLAN. The prominent feature of this RTOS is that it is a software router, which runs on middleware, recorded with Compositor RTOS v9.0.1. If the middleware recorded on a feedback with z16 and z32 generics connected and they are in reverse, the system will give a resistance of 16 + 32 Ohm = 48 Ohm. This way, the generic networks accounted: in example above there will be corporate (z32) and state (z16) connection.

The middleware approach isn’t new, as any hardware router Niagara consists of MIB, the size of which is 769 kB, compounded with routing table and generic networks set. Such system works with MME driver using discretization frequency of 192 kHz and allows connecting the whole pool of Compositor RTOS v9.0.1 forwarding platform (which is 6559 MIB’s on a moment of writing) using a dump, which is also recorded on 192 kHz sample rate. The upper frequency of z128 generic is 150 GHz, but each middleware includes RAD96 fixation, that is why an effective range is extended up to 300 GHz.

Niagara is a client system that is why it demands calling an operator for configuring programming commands. I already reviewed NIM radio chat, which I call (No Internet Messenger) last year. It turns out that it is also an acronym for Nuclear Instrumentation Module.

Each command, presented in the full version of English and Russian documentation, should be made only through an operator and each middleware has its own operator, which depends on VLAN set and servers, connected to NIM. This way, you are requesting network topology and demand operator to execute other commands, and it decides if to make command or not.

At first, middleware ran in RAD96 sandbox, but now middleware and dump become a multifunctional products. The development period of Niagara project is 2001 – 2019 and not 2012 – 2019 as the host Compositor program. The reason for this is that Niagara consists of middleware and dump and they are including the Royalty routing tables. This is proved by Inaccessible Page file emission (track recording, which is a routing path). This track, made in 2001, is a part of IP emission. The period of 2010 to 2019 covered by the reference files of timeserver, which emission contains and it is responsible for routing path hops GPS positioning in present time.

Niagara v1.0 a3

That is why Ruslan Yusipov digital portrait with codename Niagara contains 18 years of art, which is a long background for 35 years old author. Older recordings exist, such as the audiocassette recording of Yamaha PSR-330 synthesizer direct signal, which is Ruslan Yusipov live performance at the age of 14, with the author voice accompaniment, that is why Niagara is 21 years development project from 1998 to present moment.

Ruslan Yusipov art is not limited by 6559 MIB’s emission and can be enriched by routing tables from the CD-archive. This way, at the year 2021 I account to receive database of 10000 MIB’s, which will allow adding more stochastic distributions for flows selection in Compositor v9.0.1 a15.

By ruslany

Ether programming (Part 2)

Ether programming (Part 2)

This is a second part of the guide on ether programming using Compositor 10.

I start with conjunctions. There are two conjunctions in ether such as ie and et. The first one is placed after naming and the second one is placed before naming. The difference is in punctuation: in first case attributes goes from the left side and in the second from the right.

For example:

iiet <name> <name> <name> – naming;

The above command invites many chat participants simultaneously;

The -rm command has several attributes: sn, du and all;

sn – single participant;

du – dual participants;

all – all participants;

Before the all attribute you should place conjunction et. Before du attribute you should place two names for deletion and in case of sn you place one name before. By doing this, you signifies that you are really want to delete this person(s) from the large communication loop.

chat name <name> @t <name> <name>

Creates a named chat for a bounded time interval and includes particular persons in it;

q – quantum quote is a citation and also signifies its quantum state;

Quantum command has a time attribute (such as 2n, 4n, 6n, 8n, 16n, 32n), which signifies Compositor quantum grid;

q <word> q – citation;


ai – aim (your current goal or chat aim)

Note: there is a que in ether, that’s why commands are executed depending on their priorities.

@real – command is executed on a physical level;

-d – decay, allows to crossfade between two packets;

After d you can type the decay time in Compositor quantum grid (such as 2n, 4n, 6n, 8n, 16n, 32n) and in standard time units (such as seconds, minutes, hours, days);

@exit – exit anchor;

Script example:

-rm rmy @exit – allows to delete participant named rmy from the chat when leaving it; suitable when chat participant switched the messenger off but remained the service station turned on for silent messaging;

v- – angular velocity of Compositor work;

as with conjunctions: before or after the command means its application; before command – command options are written from the right; after command – command options written from the left;


vft – subband in VLF;

kh – kilohertz;

nieh – no;

bi – beat independent, the invitation to work only in standalone version of software;

New dialog:

-n – new message;

Time attributes:

@t <day of a week> – allows performing a command on the anchor in particular moment of time. Compositor grid is also applicable to a t parameter. You can set pinging with the interval of 2n, 4n, 6n, 8n, 16n, 32n (where n is a quantum grid particle expressed in samples).

For example, you can set entering the ether in particular day of a week:

-t rmy @t wed

Connects rmy to the ether in Wednesday;

Words in Nim chat are written only using abbreviations. You can use first letters of the word, two first syllables without vowels or the whole word without vowels. In rare cases, words are written fully with letters separated by spaces or without spaces (in cases where you need to transmit to a new participant of Nim chat).

By ruslany

Ether programming (Part 1)

Ether programming (Part 1)

It is possible to conduct ether programming using any Compositor version with ability to initiate an ether. Compositor with CW Decoder works as a messenger or shoutcast device with ability to invite and remove people from chat window. The name of such messenger is NIM (No Internet Messenger), which is called by a principle of its work. The main rule of NIM is a constant connection to the ether (do not confuse with Internet or Ethernet). It is relatively simple to program an ether with Compositor and CW Decoder. Now, I will list some commands and scripts to program an ether.

The main rule of NIM chat:

Enter an ether and composite the following:

-t -t over es over -t @t

-m -m over es over -m @t


-t – is a command to hold an ether line; it connects to an ether and holds in it

-f – fold, use if time collision doesn’t happen

-s – it’s a stop command to exit -t mode

d6 – a digit after the letter signifies a number of letters in a word

-t over es over – unbounded time interval pinging

-t @t – pinging on a bounded interval

-a – automatic mode when transferring to automatic station

-m – manual mode

over es over

@t – also applicable

-rm name – delete person from a chat

iwordi – italics

-i – all italics

ls – lists all ether participants of that chat room

tt – transmit, an invitation to transmit

ii name – invite person to a chat

ii name @t – invite person to a chat with bounded interval type

over es over es @t – infinite loop on a bounded time interval

name ad – add person to the chat without its notice

/ – in

| – stop


route c9 @t / t.

Route Compositor 9 (c9) on a bounded time interval to the current time point. Allows using all c9 loads on a bounded time interval at the current moment of time. Suitable if you don’t want to load c9 and allows using all previous and subsequent c9 sessions at the current moment of time.

bc ist @t – attaches an additional interval to the station development time

name bc – sets a script name as bc

@t -eff -sc bc – sets the bc script effectivity if it doesn’t affect an ether anymore

-eff – effective

-sc name – script and its name

-meet @wrld – shoutcast service to all available subscribers

-t -f @t / t. – fold time in current time point

Alternatively, just type commands like:

inj all wtb de cs pool – inject all wavetables from cs (Compositor Software) pool