Niagara project
This autumn has started from a very interesting project. While I continued working on Compositor v9.0.1 (current build a14), I felt a need to have such system as mobile real-time operation system (RTOS). Compositor v9.0.1 a14 consumes many resources at 192 kHz and I decided to sample it using Compositor v9.0.1 itself. At this time, the approach of middleware and dump was matured and I decided to make separate product for Compositor documentation development. Such manual will consist of all commands needed to operate the Niagara RTOS client. As the UNIX-like operating system, it will support most of the commands for routing protocols configuration, such as TCP/IP and VLAN. The prominent feature of this RTOS is that it is a software router, which runs on middleware, recorded with Compositor RTOS v9.0.1. If the middleware recorded on a feedback with z16 and z32 generics connected and they are in reverse, the system will give a resistance of 16 + 32 Ohm = 48 Ohm. This way, the generic networks accounted: in example above there will be corporate (z32) and state (z16) connection.
The middleware approach isn’t new, as any hardware router Niagara consists of MIB, the size of which is 769 kB, compounded with routing table and generic networks set. Such system works with MME driver using discretization frequency of 192 kHz and allows connecting the whole pool of Compositor RTOS v9.0.1 forwarding platform (which is 6559 MIB’s on a moment of writing) using a dump, which is also recorded on 192 kHz sample rate. The upper frequency of z128 generic is 150 GHz, but each middleware includes RAD96 fixation, that is why an effective range is extended up to 300 GHz.
Niagara is a client system that is why it demands calling an operator for configuring programming commands. I already reviewed NIM radio chat, which I call (No Internet Messenger) last year. It turns out that it is also an acronym for Nuclear Instrumentation Module.
Each command, presented in the full version of English and Russian documentation, should be made only through an operator and each middleware has its own operator, which depends on VLAN set and servers, connected to NIM. This way, you are requesting network topology and demand operator to execute other commands, and it decides if to make command or not.
At first, middleware ran in RAD96 sandbox, but now middleware and dump become a multifunctional products. The development period of Niagara project is 2001 – 2019 and not 2012 – 2019 as the host Compositor program. The reason for this is that Niagara consists of middleware and dump and they are including the Royalty routing tables. This is proved by Inaccessible Page file emission (track recording, which is a routing path). This track, made in 2001, is a part of IP emission. The period of 2010 to 2019 covered by the reference files of timeserver, which emission contains and it is responsible for routing path hops GPS positioning in present time.
That is why Ruslan Yusipov digital portrait with codename Niagara contains 18 years of art, which is a long background for 35 years old author. Older recordings exist, such as the audiocassette recording of Yamaha PSR-330 synthesizer direct signal, which is Ruslan Yusipov live performance at the age of 14, with the author voice accompaniment, that is why Niagara is 21 years development project from 1998 to present moment.
Ruslan Yusipov art is not limited by 6559 MIB’s emission and can be enriched by routing tables from the CD-archive. This way, at the year 2021 I account to receive database of 10000 MIB’s, which will allow adding more stochastic distributions for flows selection in Compositor v9.0.1 a15.